Wiper Motor Cover Replacement

Description:

Remove or Disconnect
1. Harness connector (H) from wiper motor cover (11).
2. Three screws (12) and wiper motor cover (11) from wiper motor assembly (13).

Install or Connect

NOTICE: See Fastener Notice.

Important
^ Before installing the Wiper motor cover. make certain assembly that the inner wipe cam (J) is positioned as shown in image.

1. Wiper motor cover (11) on wiper motor assembly (13) with three screws (12).

Tighten
^ Screws to 2 N.m (18. lb. in.).
2. Harness connector (H) to wiper motor cover (11).