Windshield Washer Reservoir: Service and Repair

Description:

Remove or Disconnect
1. Cross brace from vehicle.
2. Connector (1) from washer pump (2).
3. Hose (3) from washer pump (2).
4. Connector (4) from washer solvent level sensor (5).
5. Two screws (6), nut (7), and washer solvent container assembly (8) from vehicle.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Washer solvent container assembly (8) on vehicle with two screws (6) and nut (7).

Tighten
^ Screws to 3 N.m (27 lb. in.).
^ Nut to 6 N.m (53 lb. in.).

2. Connector (4) to washer solvent level sensor (5).
3. Hose (3) to washer pump (2).
4. Connector (1) to washer pump (2).
5. Cross brace on vehicle.