Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse Block Fuse #11. If Fuse #11 is open check for a short to ground in CKT 39.
2. Check brake fluid level. If low, refer to "Brakes". Brakes and Traction Control
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer Diagnostic Aids. Diagnostic Aids
^ Refer to System Diagnosis. System Diagnosis