Installation

INSTALL OR CONNECT
1. Using a new gasket, install the coolant pump on the engine.
- Tighten long bolts to 30 Nm (22 lbs. ft.). and short bolts to 18 Nm (13 lbs. ft.).

Torque Axis Mount:

2. Torque axis mount.
- Tighten bolt to 87 Nm (65 lbs. ft.)
3. Coolant pump pulley.
- Tighten bolts to 15 Nm (11 lbs. ft).
4. Coolant hoses onto the pump.
5. Drive belt.
6. Fill the cooling system. Service and Repair
7. Connect the battery, then start the engine
8. Check for coolant leaks.