Drive Belt: Service and Repair

Accessory Drive Belt Service:

Remove or Disconnect

1. Negative battery cable.
2. Coolant recovery bottle.
3. Lift or rotate tensioner using an 18 mm box end wrench on pulley nut.
4. Serpentine drive belt.

Install or Connect

1. Lift or rotate tensioner using an 18 mm box end wrench on pulley nut.
2. Serpentine drive belt.
3. Coolant recovery bottle.
4. Negative battery cable.

Tighten
^ Bolt to 15 Nm (11 lb. ft.).