Rear View Mirror Mounted Clip - R&I Procedures Revised
Bulletin: 93-8-6Date: Dec., '92
Ref.No.: 93-68-8
Corp.Ref.No.: 208120
SUBJECT:
ELECTRICAL SYSTEMS MANUAL UPDATE - REMOVE AND INSTALL PROCEDURE FOR CLIP MOUNTED REAR VIEW MIRROR - OPTIONS DD7 AND DD8
MODELS AFFECTED:
1992-93 PARK AVENUE/ULTRA AND LESABRE VEHICLES WITH DD7 AND DD8 OPTION: REARVIEW MIRROR SECURED WITHOUT A SET SCREW
The Remove And Install Procedure for the Clip Mounted Rear View Mirror has been added to supplement the Service and Electrical Systems Manuals with the addition of options DD7 and DD8 (Breakaway Rear View Mirrors).
Please update your respective Service Manual accordingly.
Remove or Disconnect
NOTICE:
Do not use tools or other objects to pry mirror mount or mirror away from windshield. Use of tools may damage mirror mount, mirror or windshield.
1. Adjust mirror to full down position.
2. With both hands, grasp both sides of mirror at top.
3. Remove mirror assembly from button by rotating mirror in a downward-forward motion.
Install or Connect
1. Center bottom of mirror mount against windshield at top of button.
2. Slide mount onto button keeping mount parallel to windshield.
3. As mount starts to grip button, apply a force against button while maintaining a downward force until the mount snaps onto the button with an audible click; this operation will require at least 20 pounds of force.
4. Check to make sure mirror is securely attached to button by adjusting mirror in a normal up/down and side to side range.