Owner Letter
Dear Buick Owner:
General Motors has determined that certain 1991 LeSabre model vehicles were built with an incorrect fuse identification label on the back side of the fuse panel access trim plate. These vehicles were built with correct fuses; however, should a fuse "blow" in one of the circuits labeled with an incorrect fuse value, several conditions could occur if the wrong fuse is installed.
^ If the fuse value specified on the label is lower than the circuit requires, repeated fuse failure could result.
^ If the fuse value specified on the label is higher than the circuit requires, there is a potential to damage the wiring in that circuit should another high current incident occur.
WHAT WE WILL DO
Buick Motor Division, for your convenience, is sending you the enclosed correct fuse identification label for you to install on the back side of the fuse panel instrument panel access trim plate. Or you may contact your Buick dealer to have the label installed. This service will be performed for you at no charge. If you choose to have the dealer install the label, take this letter and the label provided with you to the dealership.
WHAT YOU SHOULD DO
Please install the enclosed label by removing the instrument panel access trim plate and sticking the new label over the old label on the back side of the trim plate. Instructions for trim plate removal are shown on page 273 of your 1991 LeSabre Owner's Manual. For your convenience, these instructions are duplicated on the back side of this letter. After you install the label, or if you have sold or traded your vehicle, please let us know by completing the postage paid owner reply card enclosed and returning it to us. As mentioned previously, you also have the option of taking your vehicle, and the label provided, to your Buick dealer for installation. If you decide to have the label installed by the dealer, please ask your dealer if you wish to know how much time will be needed to schedule, process and repair your vehicle.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued satisfaction with our products.