Campaign - Fuse Identification Label Replacement: Overview

91buick03

Model Year: 1991

Bulletin No.: 91-C-2

File In Group: 8

Number: 18

Date: April, '91


SUBJECT: FUSE IDENTIFICATION LABEL

MODELS AFFECTED: CERTAIN 1991 LESABRES


This is a Customer Satisfaction Product Improvement. Dealers need not follow-up with owners. Dealers should install labels on involved vehicles in their inventory and those where the customer requests the dealers' assistance. Campaign follow-up lists (after initial mailing) and ranking information will not be maintained.

Certain 1991 LeSabre model vehicles were built with an incorrect fuse identification label on the back side of the fuse panel access trim plate. These vehicles well built with correct fuses; however, should a fuse "blow" in one of the circuits labeled with an incorrect value and the owner or technician adheres to the fuse information label, several conditions could occur if the wrong fuse is installed.

^ If the fuse value specified on the label is lower than the circuit requires, repeated fuse failure could result.

^ If the fuse value specified on the label is higher than the circuit requires, there is a potential to damage the wiring in that circuit should another high current incident occur.

To prevent the above conditions from occurring, correct fuse identification labels will be provided to the owners of record and dealers to install over the incorrect label.