Fuse Identification Label - Blank/Incorrect

90buick15

DCS NO. 91-02
GROUP NO. 8A
DATE: October 2, 1990


SUBJECT: 1991 Fuse Identification Label - Model 1991 LeSabre


TO: All Buick Dealers (VIA DCS)
Asst. Zone Mgrs.-Service/Branch Managers (VIA DISOSS)

ATTN: SERVICE MANAGERS BE SURE TO REVIEW THIS INFORMATION WITH YOUR SERVICE DEPT. PERSONNEL


It has been determined that some early built 1991 LeSabres have an incorrect or blank fuse identification label on the back side of the fuse access panel. These vehicles were built with the correct fuses; however, if a vehicle should experience a "blown" fuse, the technician must be sure to replace it with the same size fuse. Service information in the 1991 LeSabre Electrical System Manual may also improperly identify fuse sizes.


Vehicles with blank labels do show the correct fuse sizes in the owner's manual.


Current labels in GMSPO stock should not be ordered until a new part number is released. A bulletin will be released when the revised label is available.

1991 LeSabre correct fuse information:

1. 25 AMP-SPARE/BLANK 13. 20 AMP-BRAKE & HAZARD LPS
2. 20 AMP-SPARE/BLANK 14. 15 AMP-LICENSE LAMP
3. 10 AMP-DIG CLUSTER 15. 20 AMP-CTSY/PWR MIR/LOCK/LTR
4. 10 AMP-RADIO 16. 15 AMP-GAGES/ADL/ILLUM ENTRY
5. 25 AMP-WIPER/WASHER 17. 10 AMP-ENGINE ECM
6. 10 AMP-COOLING FAN RELAYS 18. 10 AMP-CRUISE CONTROL
7. 25 AMP-AIR CONDITIONING 19. 20 AMP-TURN SIG & BACK UP LPS
8. 10 AMP-ANTILOCK BRAKE 20. 20 AMP-TRK & FUEL FILL REL
9. BLANK 21. 10 AMP-SPARE/BLANK
10. 10 AMP-CLUSTER/LOW COOLANT 22. 15 AMP-SPARE BLANK/INFL REST
11. 15 AMP-CHIME/CIG LTR/RADIO/ 23. 30 AMP-BKR PWR ST/RR DEF/DR/LKS
POWER ANT 24. 30 AMP-BKR PWR WDW/SUNROOF
12. 20 AMP-AUTO LEVEL CONTROL 25. 10 AMP-INST PNL LPS


For access to additional fuses, remove right sound insulator - see owner's manual.