Road Test & System Check

1. Drive vehicle at speed greater than 25 mph, place cruise switch in On position and depress set button at end of multi-function lever.
^ Cruise indicator should illuminate and vehicle should maintain speed.

2. With foot off accelerator, hold set button in.
^ Vehicle should coast at a slower speed.

3. Release set button.
^ If new speed is greater than 25 mph, cruise control should engage and hold slower speed.

4. Slide cruise switch to Resume/Accel position and hold it there.
^ Vehicle should accelerate.

5. Release cruise switch back to On position.
^ Vehicle should hold new, faster speed.

6. Tap brake pedal.
^ Vehicle should coast slower and cruise indicator should go out.

7. Slide cruise control switch momentarily to Resume/Accel position.
^ Cruise indicator should illuminate and vehicle should accelerate to former set speed.

8. While cruising, accelerate, then remove foot from accelerator pedal.
^ Vehicle should coast back to set speed.

9. While cruising, tap cruise switch to Resume/Accel position.
^ Vehicle speed should decrease 1 mph for each tap up to ten.

10. While cruising, tap set button.
^ Vehicle speed should decrease 1 mph for each tap down to 25 mph.

11. Slide cruise control switch to Off position.
^ Cruise control should turn off and cruise indicator should go out.