Starter Motor - Revised Removal Procedure

9225buick02

Bulletin: 90-6D-1

Date: Feb., '90

Ref. No.: 90-077-6D

Corp. Ref. No.: 036401


SUBJECT:
SERVICE MANUAL UPDATE - SECTION 6D, STARTER REMOVAL 3300 ENGINE (NEW PROCEDURE)

MODELS AFFECTED:
1989 - 1990 CENTURYS WITH 3300 ENGINES (VIN CODE N)


The procedure in this bulletin replaces the procedure published in the following Service Manuals:

1989 Century Page 6D2-2
1990 Century Page 6D2-1

Starter Motor 3.3L Engine


PROCEDURE

REMOVE OR DISCONNECT


1. Negative battery cable.

- Raise the vehicle and suitably support. Refer to General Information (Section 0A).

2. Starter motor wiring.

3. Bolts from flywheel cover.

4. Flywheel cover.

5. Bolts from starter motor.

6. Starter motor.


INSTALL OR CONNECT

1. Starter motor.

2. Bolts to starter motor

Tighten
- Bolts to 40 N-m (30 lb.ft.)

3. Flywheel cover.

4. Flywheel cover bolts

Tighten
- Bolts to 10 N-m (89 lb.in.)

5. Starter motor wiring
- Lower vehicle

6. Negative battery cable

Tighten
- Cable to 12 N-m (106 lb.in.)