Replacing

Removing and installing or replacing both rear brake disks

Caution:
If the thickness of the brake disks drops below the minimum level, the disks must be replaced.

Always replace brake disks in pairs.

If the brake disks are replaced, you must also fit new brake linings.

Remove wheels. If necessary, remove and clean brake linings. After completing work, adjust handbrake, refer to Parking Brake Systems, Adjustments.





Unscrew bolts (1). Remove and suspend brake caliper from vehicle.

Note: Brake hose remains connected.

Installation: Tightening torque, refer to Specifications.





Unscrew bolts and take off brake disk.

Installation: Tightening torque, refer to Specifications.