Procedure 3

Recoding ZAE control module:

Use only MoDiC Coding Diskette V11.2 or higher to modify the deployment time of the ZAE control module using the usual coding procedure. The new information is transmitted through # 19 Airbag in the recoding section.

Note:
Ignition must not be turned off during recoding.

Load MoDiC with coding discs A and B.

^ Connect MoDiC to vehicle's diagnostic connector

^ Turn on ignition

^ Select "Coding ZCS"

^ Enter current date

^ Select "4 Series E36"

^ Select "1 Recoding"

^ Select "19 Airbag" and confirm - press "enter"

^ Start automatic coding - press "Y"

^ After recoding is complete (approx. 10 min.), turn ignition off. Wait at least 10 seconds, then turn ignition on again

^ Turn ignition off and disconnect MoDiC