Brake Pedal and Mounting Bracket Assembly Overview

Brake Pedal and Mounting Bracket Assembly Overview


The path of the brake pedal must not be shortened via extra floor mats.

• Lubricate all bearing and contact surfaces with lubricant part no. Lubricant (G 000 450 02).






1 - Mounting bracket for pedal assembly

• Illustration for vehicles with automatic transmission

• Removing and Installing, with Automatic Transmission, refer to => [ Mounting Bracket, with Automatic Transmission ] Mounting Bracket, With Automatic Transmission

2 - Sleeve

3 - Brake pedal axle

4 - Pivot pin

5 - Right securing clip (spring steel)

6 - Washer

7 - Gas pedal module bolt

• 8 Nm

8 - Gas pedal module

9 - Pedal support bolt

• 20 Nm

10 - Brake lamp sensor

• Removing and Installing, refer to => [ Brake Lamp Sensor ] Service and Repair

11 - Mounting pin bolt

• The bolt holds the mounting pins in position

• 8 Nm

12 - Left securing clip (spring steel)

13 - Brake pedal

• Removing and Installing, with Automatic Transmission, refer to => [ Brake Pedal with Automatic Transmission ] Brake Pedal With Automatic Transmission


If possible, leave the brake pedal stop installed; it could brake the mount for the brake lamp sensor if the brake pedal is released too quickly.

14 - Ball socket formed in mount

• For ball head of brake servo push rod

15 - Mount

• For ball head of brake servo push rod

• With ball stud retaining tabs

• Removing and Installing, refer to => [ Brake Booster Plunger Mount ] Brake Booster Plunger Mount

16 - Nut

• 8 Nm

17 - Stop


If possible, leave the brake pedal stop installed; it could brake the mount for the brake lamp sensor if the brake pedal is released too quickly.

18 - Grommet

• Only installed on vehicles with automatic transmission