Front Ceramic Brakes, C/SIC Caliper

Front Ceramic Brakes, C/SIC Caliper

CAUTION!
The brake disc ring and the brake disc cup are attached to each other and must never be separated. Never loosen the threaded connector on the brake disc cup.

• Install complete repair set

• After replacing brake pads, depress brake pedal several times firmly to properly seat brake pads in their normal operating position.

• When siphoning brake fluid, always use a bleeder bottle that is used exclusively for brake fluid. Brake fluid is poisonous. NEVER siphon brake fluid with your mouth!

Illustration, left front brake caliper





1 Brake caliper

Illustration, front left brake caliper

• Do not disassemble the brake caliper. Do not loosen any screws on the brake caliper.

• Removing and Installing, refer to => [ Brake Caliper, Front Brake, RS 6 ] Brake Caliper, Front Brake, RS 6

2 Bleeder screws

• installed 2 on each brake caliper

• It must be bled on each bleeder screw.

3 Bolts

• 196 Nm

• always use new bolts

4 Bracket

• for the brake line

5 Brake line connection to brake caliper

• 19 Nm

6 Bolts

• for the brake line bracket

• 10 Nm

7 Brake disc C/SIC

• for allocation and wear limit, refer to => [ Brakes System ] Brakes System

• Wear characteristics, refer to=> [ Ceramic Brake Disc Connectors ] Ceramic Brake Disc Connectors

• Removing and Installing, refer to=> [ Front Ceramic Brake Disc, C/SIC Caliper ] Front Ceramic Brake Disc, C/SIC Caliper

8 Bolt

• 10 Nm

9 Seal

10 Seal

11 Brake piston

12 Brake pad wear wire

• on the left and right brake calipers

• on the inside of each brake pad

13 Brake pads

• With the brake pad wear wire on the inside of the brake pad

• Make sure that it is installed in the correct position

• For allocation and wear limit, refer to => [ Brakes System ] Brakes System

• Removing and installing, refer to => [ Front Brake Pads, Ceramic Brakes ] Front Brake Pads, Ceramic Brakes

14 Securing clip

• Secure each pin with a locking clip.

15 Pin for the brake pad spring

• Make sure that it is installed in the correct position

• press all the way from the inside toward the outside

• Secure each pin with a locking clip.

16 Brake pad pin

• Make sure that it is installed in the correct position

• press all the way from the inside toward the outside

• Secure each pin with a locking clip.

17 Brake pad spring

• Make sure that it is installed in the correct position