Drawer, Through 06.2006

Standard Front Seats

• From 07.2006, the usual wiring harness routing to connector station under front seat => [ Connectors, Disconnecting ] Standard Front Seats Overview has been replaced with modular wiring routing => [ Modular Wiring Routing, from 07.2006, Assembly Overview ] Standard Front Seats Overview.

• The modular wiring routing has not been implemented for all countries.


Drawer, through 06.2006

Special tools, testers and auxiliary items required

• Engine and transmission holder (VAS 6095)

• Fixture for seat repair (VAS 6136)





1 Drawer

• Removing

- Remove seat => [ Standard Front Seat ].

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Pull handle - 2 - and pull out drawer - 1 -.

- Insert a screwdriver with inserted bit into opening - 5 - and remove the bolt installed beneath.

- Remove bolts - 4 - (Qty. 2).

- Remove screw - 3 -.

- Remove drawer - 1 -.

• Installing

- To install, perform the steps used in removal in reverse order.

2 Handle

3 Bolt

4 Screws, (Qty. 2)

5 Opening