5 Speed Automatic 01V

5 Speed Automatic 01V

Shift Lock Solenoid Switch, removing and installing

Removing
- Remove shift mechanism.
- Remove stop buffer from cable lever.
- Shift to Tiptronic position and remove frame.
- Move selector lever to "2".
- Disengage lever for lock cable by lifting it from its mounting and remove from mounting bracket.
- Press out bolt for locking pawl using drift.
- Remove shift lock solenoid switch together with locking pawl upward.

Installing
- Move selector lever to "2".
- Install shift lock solenoid switch together with locking pawl from above into mounting bracket.
- Carefully drive in bolt for locking pawl.
- Check engagement of locking pawl in "P" and "N" of selector lever using a screwdriver.
- Insert locking pawl into mounting bracket and lock it by feel in both mountings.
- Check locking function of locking pawl: Locking pawl must engage in shift lever position "P" and must lock the selector lever.
- Install frame on mounting bracket (ribbed side must face up) and install stop buffer in cable lever.
- Install shift mechanism.