Power Mirror Motor: Service and Repair

Power Mirror Adjustment Unit, Replacing

CAUTION: On vehicles equipped with Audi Telematics by On Star (R), switch-off the emergency (backup) battery for the Telematic/Telephone Control Module prior to disconnecting the vehicle battery. Switch-on the emergency (back-up) battery after reconnecting the vehicle battery.

- Disconnect battery Ground (GND) strap.
- Remove mirror glass.







- Remove screws - 1 - (Qty. 3).
Tightening torque: 1 Nm (9 in.lb)
- If mirror adjustment units has harness connectors, disconnect before disassembling.

NOTE: In the mirror adjustment unit has soldered wiring, the electric leads must be separated individually directly at the housing.
- Install wiring in connector housing supplied with replacement part.

NOTE: Note configuration of wiring on old adjustment unit.