Wagon

LATCH System, "Lower Anchor And Tethers For CHildren" (Avant), Assembly Overview

Rear upper tethers







1 - Concealment cap
- For installation, insert at top and press downward in direction of arrow.
2 - Bolt
- Tightening torque: 23 Nm
3 - Attachment point
4 - Spacer sleeve
5 - Backrest
6 - Buffer plugs
- Remove if necessary and install -Items 1 to 4-.

Rear lower anchors







1 - Rear lower anchor bracket
- Remove bolts -2- (2x).
2 - Bolts (4x)
- 30 Nm (22 ft lb)
- Mount rear lower anchor bar -1- with bolts -2- fastened into threaded holes in body floor panel.

NOTE:
- To install solid rear backrest, push tabs behind rear lower anchor bracket.
- If rear lower anchor is retrofitted, it may be necessary to flatten tab in vise down to about 3 mm
- When installing, make sure there is adequate clearance to the lap belt retractor. If necessary, rotate the lap belt retractor.