Setting of Kilometer Status - Display
Setting of Kilometer status - DisplayWarning
This Setting is only possible with a new cluster. This Setting is possible only one time for each instrument cluster. Only a larger Setting value can be entered. If the wrong information has been entered and confirmed, correction is not possible. The instrument cluster must be replaced.
Note:
Setting of service interval display must be done in kilometers. Therefore calculate the value from miles to Kilometers
1. Push button 1 and 1
Display shows: See box 1 in above image.
2. Confirm input with Q-button
Display shows: See box 2 in above image.
3. Input code number 13861
4. Confirm input with Q-button
Display shows: See box 3 in above image.
5. Push button 1 and 0.
Display shows: See box 1 in above image.
6. Confirm input with Q-button
Display shows: See box 2 in above image.
7. Push button 0 and 9.
8. Confirm input with Q-button
Display shows: See box 1 in above image.
9. Continue switching through program with -> button
Display shows: See box 2 in above image.
10. Enter Adaptation value.
Example: Kilometer status = 89627 round to 08963
X Hundred thousand: 100000...900000km
X Ten thousands: 10000...90000km
X Thousands: 1000...9000km
X Hundreds: 100...900km
X Tens: 10...90km
Ones: rounded to the next tens
11. Confirm input with Q-button
Display shows: See box 3 in above image.
12. Confirm input with Q-button
Display shows: See box 4 in above image.
13. Confirm input with Q-button
Display shows: See box 1 in above image.
14. End coding with -> button
Display shows: See box 2 in above image.
15. Push button 0 and 6
Display shows: See box 3 in above image.
16. Confirm input with Q-button