W/Standard Steering Wheel

Removing airbag unit 4
- Disconnect battery ground strap
- Remove Torx� bolts from steering wheel using Snap-C tool FTXL3OA or equivalent
- Tilt airbag unit downward
- Unlatch safety clamp -3-
- Disconnect harness connector for airbag unit -6-
- Remove airbag unit

To install:
- Install airbag unit mounting screws by hand
- Tighten right screw, then left screw, to specifications

5 - Torx� screw - 0.6 Nm (53 in lb.)