Manufacturer Code Charts: 2611

DTC Troubleshooting: 2611

DTC 2611:

HDD Diag

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is a problem with the HDD.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How To Troubleshoot The Navigation System.
- Check for B-CAN DTCs and resolve them before troubleshooting.

1. Clear the hard error code How To Troubleshoot The Navigation System.

2. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II) or the ON mode.

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode Navigation System Diagnostic Mode Part One.

4. Select the HDD in the System Links Navigation System Diagnostic Mode Part One.

Is HDD status OK indicated?

YES -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.�

NO -

Replace the HDD HDD Removal/Installation.�