Set Speed Does Not Cancel (Engine RPM Stays High) When the Clutch Pedal Is Pressed (M/T Model) (M/T)

Set speed does not cancel (engine rpm stays high) when the clutch pedal is pressed (M/T model)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Do the clutch pedal position switch test. Clutch Pedal Position Switch Test (M/T)

3. Do the cruise control input test. Cruise Control Input Test Test the clutch pedal position switch signal input.

Also check for:

- Short to ground in the BRN wire