Manufacturer Code Charts: 84

VSA DTC Troubleshooting: 84

DTC 84: VSA Sensor Neutral Position

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS. Initial Inspection and Diagnostic Overview

3. Do the VSA sensor neutral position memorization.

4. Test-drive the vehicle.

5. Check for DTCs with the HDS.

Is DTC 84 indicated?
YES - Substitute a known-good VSA modulator-control unit then retest. If the VSA modulator-control unit was substituted, go to step 1.

NO - The system is OK at this time. Refer to intermittent failures. Initial Inspection and Diagnostic Overview Check for loose terminals or poor connections.