Disassembly / Reassembly

Disassembly/Reassembly





NOTE:
- Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
- Blow out all passages.
- Do not let the check balls fall out of the main valve body when removing the main valve body.
- Coat all parts with ATF before reassembly.
- Replace the O-rings and filters.
- Install the filters in the direction shown.
- Refer to Main Valve Body when installing the check balls on the main valve body.

CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.