Maintenance Required Lamp/Indicator: Testing and Inspection
MAINTENANCE REMINDER UNIT / INPUT TEST1. With the ignition switch OFF, disconnect the 5-P connector from the reminder unit.
2. Inspect the connector and socket terminals to be sure they are all making good contact.
* If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
* If the terminals look OK, make the following in-put tests at the connector.
- If a test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the reminder unit must be faulty; replace it.